Detaching And Refitting The High Voltage Pwb 1 - Kyocera TASKalfa 3050ci Service Manual

Hide thumbs Also See for TASKalfa 3050ci:

Table of Contents

(4) Detaching and refitting the high voltage PWB 1

1. Remove the power source PWB (see

page 1-5-56).

2. Remove the main drive unit (see page

3. Remove five connectors from high volt-

4. Remove eight screws.

5. Unhook two hooks of PWB spacer and

then remove the high voltage PWB 1.

6. Check or replace the high voltage PWB

1 and refit all the removed parts.

High voltage

High voltage

2LK/2LN/2LM/2LC

Figure 1-5-92

High voltage PWB 1

Figure 1-5-93

Show Quick Links

Table of Contents