Detaching And Refitting The Fuser Drive Unit, Transfer Drive Unit And Feed Drive Unit - Kyocera TASKalfa 3050ci Service Manual

Hide thumbs Also See for TASKalfa 3050ci:

Table of Contents

(3) Detaching and refitting the fuser drive unit, transfer drive unit and feed drive unit

Detaching the fuser drive unit

1. Remove the rear upper cover and the

rear lower cover (see page 1-5-65).

2. Remove five electric wire holders of

feed PWB 1 assembly.

3. Release the wire saddle.

4. Remove the following twenty connec-

tors from the feed PWB 1.

YC1 (FFC connector with a lock)

YC2 (FFC connector with a lock)

*: When removing the FFC from the FFC con-

nector with a lock, remove the FFC after

released by lifting up the lock lever (see

page 1-5-50).

Electric wire holder

Figure 1-5-121

Figure 1-5-122

2LK/2LN/2LM/2LC

Electric wire holder

FFC connector

Show Quick Links

Table of Contents