Kyocera TASKalfa 3050ci Service Manual page 194

Item No.
U410 Error codes
Codes
S001
S002
S003
S004
S005
SFFF
Method: [Single Mode]
1. Select the item.
AM
FM
B/W
2. Press the start key. A test pattern is outputted.
3. Place the output test pattern as the original.
Place approximately 20 sheets of white paper on the test pattern and set them.
4. Press the start key.
Adjustment is made.
5. When normally completed, [Finish] is displayed.
If a problem occurs during auto adjustment, error code is displayed.
Method: [Setting Table]
1. Select the item.
Table1
Table2
Table3
Initial setting: Table1
2. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Description
Patch not detected
Original deviation in the main
scanning direction
Original deviation in the auxil-
iary scanning direction
Original inclination error
Original type error
Scanner other error
Display
Individual screen adjustment
Adjustment depending on error diffusions
Adjustment depending on Black and white
Display
Normal color table
Color tables for improving reproduction of characters at black
and white printing
More fidelity than Table2
Description
Codes
E001
E002
EFFF
C001
C100
C200
CFFF
Description
Description
1-3-152
2LK/2LN/2LM/2LC
Description
Engine status error
Engine sensor error
Engine other error
Controller error
Adjustment value error
Adjustment value error
Controller other error