Kyocera TASKalfa 3050ci Service Manual page 84

Item No.
U051 [LSU Out Top B/W] [LSU Out Top 3/4]
Display
MPT(L)
Cassette(L)
Duplex(L)
MPT(S)
Cassette(S) Paper feed from cassette
Duplex(S)
Large size: 218 mm or more in width of paper.
5. Change the setting value using the +/- keys or numeric keys.
For output example 1, increase the value. For output example 2, decrease the value.
The greater the value, the larger the deflection; the smaller the value, the smaller the deflec-
tion.
6. Press the start key. The value is set.
Completion
Press the stop key. The indication for selecting a maintenance item No. appears.
Description
Paper feed from MP tray
(when large size paper is used)
Paper feed from cassette
(when large size paper is used)
Duplex mode (second)
(when large size paper is used)
Paper feed from MP tray
(when small size paper is used)
(when small size paper is used)
Duplex mode (second)
(when small size paper is used)
Original
1-3-42
Description
Setting
range
-30 to 20
-30 to 20
-30 to 20
-30 to 20
-30 to 20
-30 to 20
Copy Copy
example 1 example 2
Figure 1-3-8
2LK/2LN/2LM/2LC
Initial Change in
setting value per step
0 1.0 mm
0 1.0 mm
0 1.0 mm
0 1.0 mm
0 1.0 mm
0 1.0 mm