(4) Detaching and refitting the high voltage PWB
Procedures
1. Remove the inner tray.
(See page 1-5-5)
2. Remove the eject rear cover.
(See page 1-5-5)
3. Remove FFC from the high voltage
PWB.
4. Remove four screws and remove the
high voltage PWB.
5. Check or replace the high voltage PWB
and refit all the removed parts.
Screw
Screw
Figure 1-5-86
1-5-50
2NL/2P8
FFC
Screw
Screw
High voltage PWB