Setting The Paper Size For The Side Feeder; Setting The Presence Or Absence Of The Job Separator - Kyocera TASKalfa 3050ci Service Manual

Item No.
U208

Setting the paper size for the side feeder

Description
Sets the size of paper used in side feeder.
Purpose
To change the setting when installing the side feeder or the size of paper used in the side feeder
is changed.
Setting
1. Press the start key.
2. Select the paper size (A4, B5 or Letter).
Initial setting: Letter (Inch specifications)
3. Press the start key. The setting is set.
4. Turn the main power switch off and on. Allow more than 5 seconds between Off and On.
U211

Setting the presence or absence of the job separator

Description
Sets the presence or absence of the inner job separator.
Purpose
To run this maintenance item if the inner job separator is installed.
Method
1. Press the start key.
2. Select [Inner Job Separator].
3. Select On or Off.
On
Off
Initial setting: Off
4. Press the start key. The setting is set.
5. Turn the main power switch off and on. Allow more than 5 seconds between Off and On.
A4 (Metric specifications)
Display
The inner job separator is installed
The inner job separator is not installed
Description
Description
1-3-109
2LK/2LN/2LM/2LC