Color Registration Adjustment - Kyocera TASKalfa 3050ci Service Manual

(4) Color registration adjustment

Follow the procedure below to replace the laser scanner unit.
Procedure
1. Press the system menu key.
2. Press [Adjustment/Maintenance], [Calibration] and then [Start]. Calibration begins.
Auto correction
3. Press [Color Registration], [Auto] and then [Start]. A chart is printed.
4. Place the printed chart as the original and then [Start]. Color registration begins.
Manual correction
5. Press [Color Registration], [Manual], [Chart] and then [Ptint]. A chart is printed.
6. Press [Registration].
Read figures at MH-1 to 7/CH-1 to 7/YH-1 to 7 and MV-3/CV-3/YV-3 of the reference chart and
enter the figure marked at the scale which the BK fine line is in line with the M/C/Y fine lines,
using the +/- keys.
7. Press [Start] after all values have been entered. Color registration begins.
Chart for adjustment
Chart for adjustment
Figure 1-5-51
(example)
When a red bar exactly coincides
with B, enter B as a value.
Figure 1-5-52
1-5-31
2LK/2LN/2LM/2LC