Image Formation Section; Detaching And Refitting The Inner Unit - Kyocera TASKalfa 3050ci Service Manual

1-5-4 Image formation section

(1) Detaching and refitting the inner unit

Procedure
1. Open the front cover.
2. Remove all toner container each.
3. Detach the waste toner box tray while
pushing up the hook of both ends.
4. Remove the screw and then open the
connector cover.
5. Remove the connector.
6. Remove four fixed screw of inner unit.
Waste toner
Hook
box tray
Inner unit
Connector cover
Screw
Inner unit
Screw
1-5-34
2LK/2LN/2LM/2LC
Figure 1-5-57
Screw
Screw
Screw
Figure 1-5-58
Hook
Connector