Kyocera TASKalfa 3050ci Service Manual page 432

8. Remove the connector.
9. Remove three screws.
10. Remove the fuser drive unit.
Detaching the transfer drive unit
11. Pull out the transfer belt unit a little (see
page 1-5-41).
12. Release the clamp.
13. Remove the connector.
14. Remove three screws.
15. Remove the transfer drive unit.
Fuser drive unit
Screw
Connector
Screw
Screw
Figure 1-5-125
Transfer drive unit
Transfer drive unit
Screw
Clamp
Connector
[45ppm/55ppm]
Figure 1-5-126
1-5-76
2LK/2LN/2LM/2LC
Fuser drive unit
Transfer drive unit
Screw
Clamp
Screws
Connector
[30ppm/35ppm]
Screws