1-5-7 PWBs
(1) Detaching and refitting the main PWB
Procedure
1. Remove the rear upper cover (see page
1-5-65).
2. Open the controller lid.
3. Remove two screws.
4. Unhook six hooks and then remove the
left upper cover.
5. Release six wire saddles on the control-
ler box.
6. Remove the electric wire holder.
Controller lid
Hooks
Hook
Left upper cover
Wire saddle
Wire saddle
1-5-49
2LK/2LN/2LM/2LC
Screws
Hooks
Figure 1-5-77
Electric wire holder
Wire saddles
Controller box
Wire saddle
Figure 1-5-78
Left upper
cover