Checking Lsu Cleaning Operation - Kyocera TASKalfa 3050ci Service Manual

Item No.
U469 Method: [Belt Initialize]
1. Select [Execute].
2. Press the start key. Transfer belt speed correction starts.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U474

Checking LSU cleaning operation

Description
Provides cleaning LSU by means of the LSU cleaning motor. Also, the cleaning cycle can be
adjusted.
Method
1. Press the start key.
2. Select the item.
Execute
Cycle
Method: [Execute]
1. Press the start key. Cleaning the LSU slit glass.
Setting: [Cycle]
1. Change the setting value using +/- keys.
Display
Cycle
The setting can be changed by 1000 per step.
2. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Display
Executing the cleaning operation
Setting the cleaning cycle
Cleaning cycle
Description
Description
Description
1-3-177
2LK/2LN/2LM/2LC
Setting Initial
range setting
0 to 5000 1000