Kyocera TASKalfa 3050ci Service Manual page 206

Item No.
U425 Method: [Chart2]
1. Press the start key.
2. Select the item.
CCD
DP
CIS
Method: [CCD]
1. Select the item to be set.
N850
N500
N300
C
M
Y
R
G
B
Adjust Original
2. Select the item to be set.
L
a
b
3. Enters the value that is indicated on the back of the chart using the +/- keys or numeric keys.
4. Press the start key. The value is set.
Display
Entering the target values of the chart (P/N: 302FZ56990)
used for adjustment
Entering the measurement value of the chart (P/N:
302AC68243) used for adjustment
Execution is not required
Display
Setting the N850 patch for the original for adjustment
Setting the N500 patch for the original for adjustment
Setting the N300 patch for the original for adjustment
Setting the cyan patch for the original for adjustment
Setting the magenta patch for the original for adjustment
Setting the yellow patch for the original for adjustment
Setting the red patch for the original for adjustment
Setting the green patch for the original for adjustment
Setting the blue patch for the original for adjustment
Setting the main and auxiliary scanning directions
Display
Setting the L value
Setting the a value
Setting the b value
Description
Description
Description
Description
1-3-164
2LK/2LN/2LM/2LC
Setting range
0.0 to 100.0
-200.0 to 200.0
-200.0 to 200.0