Setting The Size Conversion Factor - Kyocera TASKalfa 3050ci Service Manual

Item No.
U332

Setting the size conversion factor

Description
Sets the coefficient of nonstandard sizes in relation to the A4/Letter size. The coefficient set here
is used to convert the black ratio in relation to the A4/Letter size and to display the result in user
simulation.
Purpose
To set the coefficient for converting the black ratio for nonstandard sizes in relation to the A4/Let-
ter size.
Method
1. Press the start key.
2. Select the item to set.
Mode
Coverage(L)
Coverage(M)
Setting: [Mode]
1. Select the mode.
0
1
Initial setting: 0
2. Press the start key. The setting is set.
Setting: [Coverage(L)/(M)]
1. Select the item.
2. Change the setting using the +/-keys or numeric keys.
Display
Coverage(L)
Coverage(M)
3. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Display
Toggling full-color count and color coverage count display
Size coefficient (Low coverage)
Size coefficient (Middle coverage)
Display
Full-color count display
Color coverage count display
Size coefficient (Low coverage)
Size coefficient (Middle coverage)
Description
Description
Description
Description
1-3-142
2LK/2LN/2LM/2LC
Setting Initial
range setting
0.1 to 100 1.0
0.1 to 100 1.0