Table of Contents
Advertisement
[1]
F-10-36
3) Release the claw to remove the document edge sensor [1], and then
disconnect the connector [2].
[2]
F-10-37
10.4.14 Pick-up Solenoid
10.4.14.1 Removing the Pickup Solenoid
/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /
1) Remove the feed frame unit.
2) Remove the three screws [1], and then remove the drive unit [2].
[1]
F-10-38
3) Remove the screw [1], and then remove the pickup solenoid [2].
[2]
F-10-39
[2]
[1]
[2]
[1]
10.4.15 Registaration Solenoid
10.4.15.1 Removing the Registration Solenoid
/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /
1) Remove the feed frame unit.
2) Remove the three screws [1], and then remove the drive unit [2].
3) Remove the screw [1], and then remove the registration solenoid [2].
10.4.16 Roller Release Solenoid
10.4.16.1 Removing the Roller Release Solenoid
0013-1452
/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /
1) Detach the rear cover.
2) Remove one connector [1] and one screw [2], and then remove the roller
release solenoid [3].
[1]
[2]
F-10-40
[2]
[1]
F-10-41
[3]
[2]
[1]
F-10-42
Chapter 10
0013-1453
0013-1454
10-13
Advertisement
Table of Contents
