Removing The Flatbed Motor Unit; Removing The Contact Sensor; Flatbed Motor Unit; Removing The Cassette - Canon LaserBase MF3220 Series Service Manual

Chapter 3
[2]
2) Remove the 2 claws [2] on the operation panel unit [1], and remove the
operation panel unit.
[1]

3.2.3.8 Removing the Scanner Cover Unit

1) Remove the platen glass cover.
2) Remove the scanner cover unit [1].
- 4 front claws [2]
- 3 claws each on the right and left sides [3]
- 3 screws [4]
[1]
[3]
[2]

3.2.3.9 Removing the Flatbed Motor Unit

1) Remove the flat bed motor unit [1].
- 1 connector [2] (remove from the rear)
- 2 screws [3]
3-20
[3]
[1]
F-3-125
[2]
F-3-126
[4]
[3]
F-3-127
[1]

3.2.3.10 Removing the Contact Sensor

1) Remove the flat cable [1], and detach the contact sensor [3], while pushing
the belt tension drive [2] in arrow direction.
0012-1625

3.2.4 Flatbed Motor Unit

3.2.4.1 Removing the Cassette

1) Remove the cassette by holding the cassette handle.
3.2.4.2 Removing the front cover
1) Open the front cover [1] and remove the arm claws [2] to disengage the
connection.
0012-1627
2) Remove the shafts on both sides [3] while warping the shaft arms inside,
and remove the front cover.
[3] [2]
F-3-128
[1] [3]
F-3-129
0012-1629
[2]
0012-1585
0012-1586