Removing From The Connection Equipment (Reader); Removing The Dadf + Reader Unit - Canon F1 Service Manual

4
Parts Replacing and Cleaning > Removing from the connection equipment (Reader) > Removing the DADF + Reader Unit > Procedure

Removing from the connection equipment (Reader)

Removing the DADF + Reader Unit

■ Preparation
CAUTION:
When a delivery system option (Buffer Path Unit) is installed, be sure to disconnect it
from the host machine.
1) Remove the Box Right Cover (Refer to page 4-18).
2) Remove the Box Left Cover (Refer to page 4-18).
3) Remove the Box Upper Cover (Refer to page 4-19).
4) Remove the Upper Right Cover 1/Upper Left Cover (Refer to page 4-19).
■ Procedure
CAUTION:
• Because the weight of the equipment is approx. 40kg, be sure to work with 2 or more
people when lifting it. Also, be sure to lift the equipment horizontally.
• To prevent deformation of the bottom of the Reader Unit, be sure that the Reader
Support Plate [B] is installed when placing it on the floor.
• Do not place it directly on the floor while the Reader Support Plate [B] is not
installed.
[B]
4 Parts Replacing and Cleaning > Removing from the connection equipment (Reader) > Removing the DADF + Reader Unit > Procedure
[B]
F-4-9
1) Move the Reader Scanner Unit to the fixing position by executing the following service
mode.
Service Mode (Level 2) > COPIER > FNCTION > MISC-R > RD-SHPOS
CAUTION:
Be sure to move the Scanner Unit to the fixing position and secure it in place when
moving the Reader after installation. Otherwise, the Scanner Unit may get damage
2) Disconnect the Reader Power Supply Cable [1].
• 2 Connectors [2]
• 1 Wire Saddle [3]
• 1 Screw [4]
• 1 Round Shape Terminal [5]
• 1 Toothed Washer [6]
x2
[3]
[2]
[2]
4-7
[4]
[5]
[6]
[1]
F-4-10
4-7