Switch Images And Configuration Files - Lenovo CN4093 Application Manual

Switch Images and Configuration Files

552
CN4093 Application Guide for N/OS 8.3
This section describes how to use MIB calls to work with switch images and
configuration files. You can use a standard SNMP tool to perform the actions, using
the MIBs listed in Table 41.
Table 41. lists the MIBS used to perform operations associated with the Switch
Image and Configuration files.
Table 41.
MIBs for Switch Image and Configuration Files
MIB Name
agTransferServer
agTransferImage
agTransferImageFileName
agTransferCfgFileName
agTransferDumpFileName
agTransferAction
agTransferLastActionStatus
agTransferUserName
agTransferPassword
agTransferTSDumpFileName
The following SNMP actions can be performed using the MIBs listed in
 Load a new Switch image (boot or running) from a FTP/TFTP/SFTP server
 Load a previously saved switch configuration from a FTP/TFTP/SFTP server
 Save the switch configuration to a FTP/TFTP/SFTP server
 Save a switch dump to a FTP/TFTP/SFTP server
MIB OID
1.3.6.1.4.1872.2.5.1.1.7.1.0
1.3.6.1.4.1872.2.5.1.1.7.2.0
1.3.6.1.4.1872.2.5.1.1.7.3.0
1.3.6.1.4.1872.2.5.1.1.7.4.0
1.3.6.1.4.1872.2.5.1.1.7.5.0
1.3.6.1.4.1872.2.5.1.1.7.6.0
1.3.6.1.4.1872.2.5.1.1.7.7.0
1.3.6.1.4.1872.2.5.1.1.7.9.0
1.3.6.1.4.1.1872.2.5.1.1.7.10.0
1.3.6.1.4.1.1872.2.5.1.1.7.11.0
Table 41.