Example 7: Private Vlan Configuration - Lenovo CN4093 Application Manual

8. Specify QoS parameters for the vPort.
9. Enable vPort.
10. Enable tagging/trunk mode on external port.

Example 7: Private VLAN Configuration

1. Select a VLAN and define the Private VLAN type as primary.
2. Configure a promiscuous port for VLAN 700.
3. Configure three secondary VLANs: isolated VLAN and community VLAN.
4. Map secondary VLANs to primary VLAN.
© Copyright Lenovo 2015
CN4093(config_ufp_vport)# qos bandwidth min 20
CN4093(config_ufp_vport)# qos bandwidth max 85
CN4093(config_ufp_vport)# enable
CN4093(config_ufp_vport)# exit
CN4093(config)# interface port EXT4
CN4093(config-if)# switchport mode trunk
CN4093(config-if)# switchport trunk native vlan 1
CN4093(config-if)# switchport trunk allowed vlan add 1,1002
CN4093(config-if)# exit
Follow this procedure to configure a Private VLAN.
CN 4093(config)# vlan 700
CN 4093(config)# private-vlan primary
CN 4093(config)# exit
CN4093(config)# interface port INTA10
CN4093(config-if)# switchport mode private-vlan
CN4093(config-if)# switchport private-vlan mapping 700
CN4093(config-if)# exit
CN4093(config)# vlan 701
CN4093(config-vlan)# private-vlan isolated
CN4093(config-vlan)# exit
CN4093(config)# vlan 702
CN4093(config-vlan)# private-vlan community
CN4093(config-vlan)# exit
CN4093(config)# vlan 703
CN4093(config-vlan)# private-vlan community
CN4093(config-vlan)# exit
CN4093(config)# vlan 700-703
CN4093(config-vlan)# stg 1
CN4093(config-vlan)# exit
CN4093(config)# vlan 700
CN4093(config-vlan)# private-vlan association 701,702,703
CN4093(config-vlan)# exit
(in percentage)
(in percentage)
Chapter 21: Unified Fabric Port
357