Supported Radius Attributes - Lenovo CN4093 Application Manual

Supported RADIUS Attributes

100
CN4093 Application Guide for N/OS 8.3
The 802.1X Authenticator relies on external RADIUS servers for authentication
with EAP. Table 11lists the RADIUS attributes that are supported as part of
RADIUS-EAP authentication based on the guidelines specified in Annex D of the
802.1X standard and RFC 3580.
Table 11.
Support for RADIUS Attributes
# Attribute
1 User-Name
4 NAS-IP-Address
5 NAS-Port
24 State
30 Called-Station-ID The MAC address of the
31 Calling-Station-I
D
64 Tunnel-Type
65 Tunnel-Medium-
Type
Attribute Value
The value of the Type-Data field
from the supplicant's
EAP-Response/Identity
message. If the Identity is
unknown (i.e. Type-Data field is
zero bytes in length), this
attribute will have the same
value as the Calling-Station-Id.
IPv4 address of the
authenticator used for Radius
communication.
Port number of the
authenticator port to which the
supplicant is attached.
Server-specific value. This is
sent unmodified back to the
server in an Access-Request
that is in response to an
Access-Challenge.
authenticator encoded as an
ASCII string in canonical
format, such as 000D5622E3 9F.
The MAC address of the
supplicant encoded as an ASCII
string in canonical format, such
as 00034B436206.
Only VLAN (type 13) is
currently supported (for 802.1X
RADIUS VLAN assignment).
The attribute must be untagged
(the Tag field must be 0).
Only 802 (type 6) is currently
supported (for 802.1X RADIUS
VLAN assignment). The
attribute must be untagged (the
Tag field must be 0).
A-R A-A A-C A-R
1 0-1 0 0
1 0 0 0
1 0 0 0
0-1 0-1 0-1 0
1 0 0 0
1 0 0 0
0 0-1 0 0
0 0-1 0 0