Lenovo CN4093 Application Manual page 308

10. Enable desired DCBX configuration negotiation on FCoE ports:
11. Enable desired DCBX advertisements on other CEE ports:
12. Disable DCBX for each non-CEE port as appropriate:
13. Configure the Fibre Channel network:
14. Save the configuration.
308
CN4093 Application Guide for N/OS 8.3
CN 4093(config)# cee port INTA1 dcbx enable
CN 4093(config)# cee port INTA1 dcbx app_proto advertise
CN 4093(config)# cee port INTA1 dcbx ets advertise
CN 4093(config)# cee port INTA1 dcbx pfc advertise
CN 4093(config)# cee port INTA2 dcbx enable
CN 4093(config)# cee port INTA2 dcbx app_proto advertise
CN 4093(config)# cee port INTA2 dcbx ets advertise
CN 4093(config)# cee port INTA2 dcbx pfc advertise
CN 4093(config)# cee port EXT1 dcbx enable
CN 4093(config)# cee port EXT1 dcbx app_proto advertise
CN 4093(config)# cee port EXT1 dcbx ets advertise
CN 4093(config)# cee port EXT1 dcbx pfc advertise
CN 4093(config)# no cee port INTA3-INTC14,EXT2-EXT22 dcbx enable
CN 4093(config)# system port ext21-ext22 type fc
CN 4093(config-vlan)# interface fc EXT22
CN 4093(config-if)# switchport trunk allowed vlan 1,1002
CN 4093(config-if)# exit
CN 4093(config)# vlan 1002
CN 4093(config-vlan)# npv enable
CN 4093(config-vlan)# npv traffic-map external-interface EXT22
CN 4093(config-vlan)# exit
Note: The Fibre Channel network is configured as an NPV gateway as described in
"Fibre Channel" on page
FCoE can be configured together, the additional Fibre Channel elements for this
configuraiton are included at the end of this example in order to focus on the FCoE
steps.
309. Although VLAN properties for Fibre Channel and