Lenovo CN4093 Application Manual page 234

234
CN4093 Application Guide for N/OS 8.3
For example:
CN 4093(config)# copy log tftp 192.168.1.85 // Copy logs from clients on
the master
CN 4093(config)# copy log swn 3 tftp 10.10.10.1 // Copy logs from stack
member 3
To configure up to two external hosts to log stack errors, use the command:
CN 4093(config)# logging host <host instance> {address <IPv4 address>|address6
<IPv6 address>|facility <facility (0-7)>|severity <severity (0-7)>}
where:
<host instance>
<IPv4 address>
<IPv6 address>
<facility (0-7)>
<severity (0-7)>
To enable console output of syslog messages, use the command:
CN 4093(config)# logging console severity <severity (0-7)>
where <severity> configures the severity of logs to be sent to the console.
To configure the severity of syslogs written to flash, use the command:
CN 4093(config)# logging buffer severity <severity (0-7)>
where <severity> configures the severity of logs to be written to flash.
The host instance; either 1 or 2.
The IPv4 address of the host being logged.
The IPv6 address of the host being logged.
The facility (0-7) of the logs being written to
external syslog servers.
The severity (0-7) of the logs being written to
external syslog servers.