3. Set each server and workstation's default gateway to the appropriate switch IP
4. Configure the default gateways to the routers' addresses.
5. Verify the configuration.
376
CN4093 Application Guide for N/OS 8.3
interface (the one in the same subnet as the server or workstation).
Configuring the default gateways allows the switch to send outbound traffic to the
routers:
CN 4093(config)# ip gateway 1 address 205.21.17.1 enable
CN 4093(config)# ip gateway 2 address 205.21.17.2 enable
CN 4093(config)# show interface ip
Examine the resulting information. If any settings are incorrect, make the
appropriate changes.