Optional Setup For Telnet Support - Lenovo CN4093 Application Manual
10gb converged scalable switch
Hide thumbs
Also See for CN4093:
- Application manual (634 pages) ,
- Installation manual (72 pages) ,
- User manual (58 pages)
Table of Contents
Advertisement
Optional Setup for Telnet Support
1. Telnet is enabled by default. To change the setting, use the following command:
60
CN4093 Application Guide for N/OS 8.3
Note: This step is optional. Perform this procedure only if you are planning on
connecting to the CN4093 through a remote Telnet connection.
CN 4093(config)# no access telnet
Advertisement
Table of Contents
