Ipv6 Configuration Example 2 - Lenovo CN4093 Application Manual

IPv6 Configuration Example 2

1. Assign an IPv6 address and prefix length to the interface.
2. Configure the IPv6 default gateway.
3. Configure Router advertisements for the interface (optional)
4. Verify the configuration.
© Copyright Lenovo 2015
Use the following example to manually configure IPv6 on an interface.
CN 4093(config)# interface ip 3
CN 4093(config-ip-if)# ipv6 address 2001:BA98:7654:BA98:FEDC:1234:
ABCD:5214
CN 4093(config-ip-if)# ipv6 prefixlen 64
CN 4093(config-ip-if)# ipv6 seccaddr6 2003::1 32
CN 4093(config-ip-if)# vlan 2
CN 4093(config-ip-if)# enable
CN 4093(config-ip-if)# exit
The secondary IPv6 address is compressed, and the prefix length is 32.
CN 4093(config)# ip gateway6 1 address 2001:BA98:7654:BA98:FEDC:1234:
ABCD:5412
CN 4093(config)# ip gateway6 1 enable
CN 4093(config)# interface ip 3
CN 4093(config-ip-if)# no ipv6 nd suppress-ra
CN 4093(config-ip-if)# show layer3
Chapter 24: Internet Protocol Version 6
395