Configuring Lacp - Lenovo CN4093 Application Manual

Configuring LACP

1. Configure port parameters. All ports that participate in the LACP LAG must have
2. Select the port range and define the admin key. Only ports with the same admin
3. Set the LACP mode.
4. Optionally allow member ports to individually participate in normal data traffic if
5. Set the link aggregation as static, by associating it with LAG ID 65:
150
CN4093 Application Guide for N/OS 8.3
Use the following procedure to configure LACP for ports 7, 8 and 9 to participate
in a single link aggregation.
the same settings, including VLAN membership.
key can form a LACP LAG.
CN 4093(config)# interface port 7-9
CN 4093(config-if)# lacp key 100
CN 4093(config-if)# lacp mode active
CN 4093(config-if)# exit
no LACPDUs are received.
CN 4093(config-if)# no lacp suspend-individual
CN 4093(config-if)# exit
CN 4093(config-if)# portchannel 65 lacp key 100