Switch Images and Configuration Files
© Copyright Lenovo 2015
This section describes how to use MIB calls to work with switch images and
configuration files. You can use a standard SNMP tool to perform the actions, using
the MIBs listed in Table 42.
Table 42.
lists the MIBS used to perform operations associated with the Switch
Image and Configuration files.
Table 42.
MIBs for Switch Image and Configuration Files
MIB Name
agTransferServer
agTransferImage
agTransferImageFileName
agTransferCfgFileName
agTransferDumpFileName
agTransferAction
agTransferLastActionStatus
agTransferUserName
agTransferPassword
agTransferTSDumpFileName
The following SNMP actions can be performed using the MIBs listed in Table 42.
Load a new Switch image (boot or running) from a FTP/TFTP/SFTP server
Load a previously saved switch configuration from a FTP/TFTP/SFTP server
Save the switch configuration to a FTP/TFTP/SFTP server
Save a switch dump to a FTP/TFTP/SFTP server
.
MIB OID
1.3.6.1.4.1872.2.5.1.1.7.1.0
1.3.6.1.4.1872.2.5.1.1.7.2.0
1.3.6.1.4.1872.2.5.1.1.7.3.0
1.3.6.1.4.1872.2.5.1.1.7.4.0
1.3.6.1.4.1872.2.5.1.1.7.5.0
1.3.6.1.4.1872.2.5.1.1.7.6.0
1.3.6.1.4.1872.2.5.1.1.7.7.0
1.3.6.1.4.1872.2.5.1.1.7.9.0
1.3.6.1.4.1.1872.2.5.1.1.7.10.0
1.3.6.1.4.1.1872.2.5.1.1.7.11.0
Chapter 37: Simple Network Management Protocol
517