Syslog Server - Lenovo CN4093 Application Manual

SYSLOG Server

© Copyright Lenovo 2015
During switch startup, if the switch fails to get the configuration file, a message can
be recorded in the SYSLOG server.
The CN4093 supports requesting of a SYSLOG server IP address from the DHCP
server as described in RFC 2132, option 7. DHCP SYSLOG server request option is
enabled by default.
Manually configured SYSLOG server takes priority over DHCP SYSLOG server.
Up to two SYSLOG server addresses received from the DHCP server can be used.
The SYSLOG server can be learnt over a management port or a data port.
Use the show logging command to view the SYSLOG server address.
DHCP SYSLOG server address option can be enabled/disabled using the following
command:
CN 4093(config)# [no] system dhcp syslog
Chapter 1: Switch Administration
39