Re-Enabling Locked Accounts; Listing Current Users; Logging In To An End User Account - Lenovo CN4093 Application Manual

10gb converged scalable switch

Hide thumbs Also See for CN4093:

Table of Contents

Re-enabling Locked Accounts

The administrator can re-enable a locked account by reloading the switch or by

using the following command:

CN 4093(config)# access user strong-password clear local user lockout

username <user name>

However, the above command cannot be used to re-enable an account disabled by

the administrator.

To re-enable all locked accounts, use the following command:

CN 4093(config)# access user strong-password clear local user lockout all

The show access user command displays defined user accounts and whether

or not each user is currently logged into the switch.

CN 4093# show access user

- Enabled - offline

- Disabled - offline

- Always Enabled - online 1 session

Current User ID table:

1: name USERID

, ena, cos admin

2: name jane

, ena, cos user

3: name john

, ena, cos user

Once an end user account is configured and enabled, the user can login to the

switch, using the username/password combination. The level of switch access is

determined by the Class of Service established for the end user account.

, password valid, offline

, password valid, online

Chapter 4: Securing Administration