Lenovo CN4093 Application Manual page 474

10gb converged scalable switch
Hide thumbs Also See for CN4093:
Table of Contents

Advertisement

7. Configure route summarization by specifying the starting address and prefix
8. Use the hide command to prevent a range of addresses from advertising to the
474
CN4093 Application Guide for N/OS 8.3
length of the range of addresses to be summarized.
CN 4093(config)# ipv6 router ospf
CN 4093(config-router-ospf3)# area-range 1 address 36:0:0:0:0:0:0:0 32
CN 4093(config-router-ospf3)# area-range 1 area 0
CN 4093(config-router-ospf3)# area-range 1 enable
This differs from OSPFv2 only in that the OSPFv3 command path is used, and the
address and prefix are specified in IPv6 format.
backbone.
CN 4093(config-router-ospf)# area-range 2 address 36:0:0:0:0:0:0:0 8
CN 4093(config-router-ospf)# area-range 2 area 0
CN 4093(config-router-ospf)# area-range 2 hide
CN 4093(config-router-ospf)# exit
This differs from OSPFv2 only in that the OSPFv3 command path is used, and the
address and prefix are specified in IPv6 format.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents