Vm(Dpt) Group-System Setting [3-7-1] - Panasonic KX-TDA50 Features Manual

Value Range
Max. 4 digits (consisting of 0–9)
Programming References
None
Feature Guide References
1.2.1 Idle Extension Hunting
4.9.10 VM(DPT) Group—System Setting [3-7-1]
A Panasonic Voice Processing System (VPS) with DPT Integration can be connected to DPT ports of the
PBX. The DPT ports that are connected to the VPS are called a VM (DPT) Group.
A maximum of 1 VM (DPT) Group can be programmed.
Call Waiting on VM Group
Enables the queuing of calls when all extension ports of the VM (DPT) group are busy. (Call Waiting tone is
not sent to any VM port.)
Default
Enable
Value Range
Disable, Enable
Programming References
4.7.13 Extension Port [1-5]
Feature Guide References
1.19.1 Voice Mail (VM) Group
Intercept to Mailbox
Enables the PBX to send the mailbox number of the called extension to the VPS when a CO line call is
redirected to the VM (DPT) group by Intercept Routing. When the VPS receives the mailbox number, the
VPS answers the call with the appropriate mailbox.
Default
Enable
Value Range
Disable, Enable
Programming References
4.7.13 Extension Port [1-5]
4.9.1 Trunk Group—TRG Settings [3-1-1]—Intercept—Intercept Destination—Day, Lunch, Break, Night
4.9 Groups [3]
Feature Guide 475