3-7-1] Vm(Dpt) Group-System Settings - Panasonic KX-TDA100 Programming Manual

5.19 [3-7-1] VM(DPT) Group—System Settings
A Panasonic Voice Processing System (VPS) with DPT Integration can be connected to DPT ports of the PBX.
The DPT ports that are connected to the VPS are called a VM (DPT) Group.
With the KX-TDA30, a maximum of 1 VM (DPT) Group can be programmed; with the KX-TDA100/
KX-TDA200, 2 VM (DPT) Groups can be programmed; and with the KX-TDA600, 8 VM (DPT) groups can be
programmed.
Call Waiting on VM Group
Enables the queuing of calls when all extension ports of the VM (DPT) group are busy. (Call Waiting tone is
not sent to any VM port.)
Value Range
Disable, Enable
Maintenance Console Location
5.19 [3-7-1] VM(DPT) Group—System Settings
Programming Manual References
3.5 [1-1] Slot—Port Property - Extension Port
Feature Guide References
1.2.2.4 Queuing Feature
1.24.1 Voice Mail (VM) Group
Intercept to Mailbox
Enables the PBX to send the mailbox number of the called extension to the VPS when a call is redirected to
the VM (DPT) group by Intercept Routing. When the VPS receives the mailbox number, the VPS answers the
call with the appropriate mailbox.
Value Range
Disable, Enable
Maintenance Console Location
5.19 [3-7-1] VM(DPT) Group—System Settings
Programming Manual References
3.5 [1-1] Slot—Port Property - Extension Port
6.1 [4-1-1] Wired Extension—Extension Settings—Intercept Destination—
called party does not answer—Day, Lunch, Break, Night
6.10 [4-2-1] Portable Station—Extension Settings—Intercept Destination—
called party does not answer—Day, Lunch, Break, Night
5.19 [3-7-1] VM(DPT) Group—System Settings
Intercept Destination—When
Intercept Destination—When
PC Programming Manual 539