Front Panel Leds; Actual Values - GE Multilin F650 Instruction Manual

Hide thumbs Also See for Multilin F650:

Table of Contents

6 ACTUAL VALUES 6.1FRONT PANEL

The menu bar in the main screen of EnerVista F650 Setup software shows the ACTUAL menu option. This option

concentrates and displays all status of protection, control elements, metering, counters information, oscillography, events,

fault locator, etc. This menu is divided in several submenus that will be detailed in the following sections.

Operation of the relay front LEDs is shown on the following figure (Actual > Front Panel > LEDs) by the lighting of the

associated LED in the appropriate color. The Ready LED is green when the relay is in service. LEDs 1 to 5 light up in red

when active, LEDs 6 to 10 light up in orange, and the last 5 LEDs light up in green.

The first five LEDs are latched by hardware and can only be reset by a LEDs RESET Command, either pressing the "esc"

key on the Front of the Relay, or by Communications using the appropriate signal. The rest of LEDs are not latched, but can

be latched by logic.

Table 6–1: FRONT PANEL LEDS

LOCAL OPERATION MODE

OPERATIONS BLOCKED

F650 Digital Bay Controller

6.1 FRONT PANEL

Troubleshooting