Communication Setpoints; Serial Ports; Network (Ethernet); Modbus Protocol - GE Multilin F650 Instruction Manual

5 SETPOINTS

5.2PRODUCT SETUP

5.2.1.1 SERIAL PORTS

Baud rate and parity for COM1 and COM2 serial communication ports.
Table 5–2: SERIAL PORTS SETPOINTS
PRODUCT SETUP > COMMUNICATION SETPOINTS >SERIAL PORTS
Name
COM1 Baud Rate
COM2 Baud Rate
Parity

5.2.1.2 NETWORK (ETHERNET)

Ethernet communication parameters for COM3. Two different Ethernet addresses can be used, but the first IP has always
to be set as the second IP Address is an Alias. The ModBus Slave address used by Ethernet ports is the one set for COM2.
Table 5–3: NETWORK SETPOINTS
PRODUCT SETUP>COMMUNICATION SETPOINTS >NETWORK (ETHERNET) NETWORK
(ETHERNET)1 > NETWORK (ETHERNET)2
Name
IP Address Oct1
IP Address Oct2
IP Address Oct3
IP Address Oct4
Netmask Oct1
Netmask Oct2
Netmask Oct3
Netmask Oct4
Gateway IP Oct1
Gateway IP Oct2
Gateway IP Oct3
Gateway IP Oct4

5.2.1.3 MODBUS PROTOCOL

ModBus Slave Addresses for serial and Ethernet communication and the ModBus port number used for ModBus TCP/IP.
For more detail information go to appendix B in this manual.
Table 5–4: MODBUS PROTOCOL SETPOINTS
PRODUCT SETUP>COMMUNICATION SETPOINTS >MODBUS PROTOCO
Name
ModBus Address COM1 254
ModBus Address COM2 254
ModBus Port Number
GE Multilin
Default Value Step
19200
19200
NONE
Default Value Step
0
0
0
0
0
0
0
0
0
0
0
0
Default Value Step
502
F650 Digital Bay Controller
5.2 PRODUCT SETUP

5.2.1 COMMUNICATION SETPOINTS

Range
[300 : 115200]
[300 : 115200]
[NONE:ODD:EVEN]
Range
[0 : 255]
[0 : 255]
[0 : 255]
[0 : 255]
[0 : 255]
[0 : 255]
[0 : 255]
[0 : 255]
[0 : 255]
[0 : 255]
[0 : 255]
[0 : 255]
Range
[1 : 255]
[1 : 255]
[0 : 65535]
5
5-3