Iec 60870-5-104 Protocol Setpoints; Modbus User Map Setpoints - GE Multilin F650 Instruction Manual

5 SETPOINTS
Binary Input Block 6
Binary Input Block 7
Binary Input Block 8
Binary Input Block 9
Binary Input Block 10
5.2.1.5 IEC 60870-5-104
Communication setpoints for IEC 60870-5-104 protocol. For more detail information go to appendix D in this manual.
Table 5–6: IEC 60870-5-104 PROTOCOL SETPOINTS
PRODUCT SETUP>COMMUNICATION SETPOINTS >IEC 870-5-104
Name
Function
TCP Port
Common Addr of ASDU
Cyclic Meter Period
Synchronization Event
ModBus user map definition. 256 records, selectable from the complete relay ModBus map form the ModBus user map. For
more detail information go to appendix B in this manual.
Table 5–7: MODBUS USER MAP SETPOINTS
PRODUCT SETUP > MODBUS USER MAP
Name
Address 00
Address 01
...
Address 254
Address 255
5.2.3.1 OVERVIEW
The fault report module defines the type of fault (three-phase, phase-to-phase, phase-to-ground), and the distance to the
fault. The fault activation signal (FAULT REPORT TRIGG) is programmed at "Setpoint > Relay Configuration >
Protection Elements".
The fault report provides fault date, fault type, fault location information, and the index of the last fault report produced
(Fault Report Number) for the last fault produced.
Information referred to the last ten faults is stored as fault report and available to the user through EnerVista 650 Setup
software or the web server application. Each fault report includes the following information:
• Fault date and time
• Pre-fault current and voltage in primary values
GE Multilin
CTL EVENTS 81-96
CTL EVENTS 97-112
CTL EVENTS 113-128
SWITCHGEAR 1-8
SWITCHGEAR 9-16
Default Value
DISABLED
2404
255
0
0
Default Value
0000
0000
0000
0000
F650 Digital Bay Controller
Step Range
[DISABLED – ENABLED]
[0 : 65535]
[0 : 65535]
[0 : 3600]
[0 : 3600]
Step Range
[0000 : FFFF]
[0000 : FFFF]
...
[0000 : FFFF]
[0000 : FFFF]
5.2 PRODUCT SETUP
5.2.2 MODBUS USER MAP
5.2.3 FAULT REPORT
5-5
5