GE Multilin F650 Instruction Manual page 508

APPENDIX F
NOTE 2: DESCRIPTION OF X, Y AND Z IN INPUT/OUTPUT BOARDS
X
For the I/O board selection in the relay
model:
CCY
0Z
LIST OF TIME OVERCURRENT CURVES AVAILABLE IN
F650
IEEE extremely/very/moderately inverse
IEC Curve A/B/C/Long-Time Inverse/ Short-Time Inverse
IAC extremely/very/normally/moderately inverse
ANSI extremely/very/normally/moderately inverse
I2t
Definite time
Rectifier curve
User Curve - FlexCurve™ A/B/C/D
GE Multilin
F, G, H or J, the I/O board name, depending on the Relay model.
F and G are internal Relay boards, and H and J are additional boards available in CIO
modules (remote Bus CAN I/O module).
I/O BOARD TYPE
ENERVISTA 650
ASSOCIATED DIGIT SETUP BOARD
SETTINGS
0 NONE
1 16 INP+ 8OUT
8 INP +8 OUT
2
+SUPV
Is the name used for inputs in I/O boards
Mixed, 16 digital inputs: CC1....CC16
Supervision: 8 digital inputs: CC1,..., CC8
Is the name used for the different outputs in I/O boards, 8 outputs available for any of
the two types of board (01,...., 08)
F650 Digital Bay Controller
F.1 FACTORY DEFAULT CONFIGURATION
BOARD
TYPE
None
Mixed
Supervisio
n
F
F-17