Select Main Screen; Default Logotype Screen; Default Metering Screen - GE Multilin F650 Instruction Manual

Hide thumbs Also See for Multilin F650:

Table of Contents

4 HUMAN INTERFACES

4.2.5.10 SELECT MAIN SCREEN

The relay display offers the possibility to select the default main screen. For this purpose, the user must access the "Select

Main Screen" menu through the HMI. This menu includes the following options:

This option selects as main screen the relay logotype including the firmware and boot code versions, the relay model and

the communication parameters for local port COM2.

This option shows a Metering screen including the phase and ground currents as well as phase-to-phase voltage, and zero

sequence voltage values, all of them in primary values.

This option alternates in time the two previous options.

F 6 5 0 2 . 0 0 ( 3 . 0 )

G e n e r a l E l e c t r i c

F 6 5 0 M Z D F 2 G 1 H I R

1 9 2 0 0 N 8 1 : M O D B U S : 2 5 4

Figure 4–24: DEFAULT LOGOTYPE SCREEN

I a 0 . 0 0 0

V a b 0 . 0 0 0

I b 0 . 0 0 0

V b c 0 . 0 0 0

I c 0 . 0 0 0

V c a 0 . 0 0 0

I g 0 . 0 0 0

V 0 0 . 0 0 0

Figure 4–25: DEFAULT METERING SCREEN

F650 Digital Bay Controller

4.2 HUMAN MACHINE INTERFACE (HMI)