"4.1.3 The Acknowledge Key; Batteries - Leica iCON PA10 User Manual

4.1.3
Functionalities
4.1.4
Battery charge levels
Operation
The Acknowledge Key
Acknowledging an alarm
A person wearing the pedestrian tag can acknowledge an alarm, thus silencing
the audible and vibratory alarm signals.
To acknowledge an alarm, press the acknowledge key once.
☞
Setting off the Panic alarm
A person wearing the pedestrian tag can set off a Panic alarm to indicate the
need for help. The Panic alarm is displayed on all iCON PA display units within
communication range, enabling drivers of nearby machines to render assist-
ance. (Refer to "Alarm signals" in "4.3.1 Status Indicators".)
To set off the Panic alarm, press the acknowledge key longer than
☞
6 seconds.
Running the self check of the tag
The pedestrian tag comes with an integrated self-check functionality which
includes checking the battery status. (Refer to the section "Battery charge
levels".)
To run the self check, press the acknowledge key twice within a
☞
second.
Performing a hard reset of the tag
A hard reset is only possible when the tag is inserted into the gang charger.
(Refer to the section "Performing a hard reset".)

Batteries

The iCON PA system constantly monitors the battery status of the pedestrian
tag. The battery status is indicated in the following situations:
during normal operation as visual "heartbeat". Refer to the section "Oper-
•
ating status".
when running the integrated self check of the pedestrian tag. Refer to
•

"4.1.3 The Acknowledge Key".

when the integrated self check is automatically performed after removing
•
the tag from the gang charger.
Indication of self check
0 s 0.2s
18259_001
0.4s
Fig. 11: Indication of self check
0.6s 0.8s
29