Filling The Moistener (Dm300M Only) - Pitney Bowes dm475m series Operator's Manual

Filling the Moistener (DM300M Only)

1. Check the moistener tank to see how much sealing solution is
left.
Check Level Here
2. Add enough sealing solution or water to bring the sealant level
up to the bottom of the fill hole. We recommend sealing solution
because it helps keep your moistener clean and improves
sealing efficiency.
3. If the tank was empty, allow 30 minutes for the moistener
brush and wick to get completely wet.
CAUTION! Don't overfill the moistener tank.
SDC2036A
7 • Maintenance
Fill Here
7-7