Pitney Bowes dm475m series Operator's Manual page 93

Removing the Moistener Brush (continued)
4. Clean the brush in plain water, and rinse thoroughly.
5. Position the brush as shown so its
bottom edge is under the mounting
tabs.
6. Slide the brush back towards the
rear of the moistener.
7. If you need to clean the wick and holder, continue with Removing
the Holder and Wick procedure on the next page. Otherwise,
push down on the blue release lever on the moistener.
8. Slide the moistener back onto the machine. You should hear a
click as it engages.
SDC2036A
7 • Maintenance
Release
Lever
7-11