3. Select Seal Only.
4. Tap Apply.
5. Place your envelope face up, flap down into the feeder. Be sure to slide the envelope flap under
the edge of the feed deck
Filling the moistener tank
1. Check the level of sealing solution in your moistener tank.
2. Add enough E-Z Seal® to bring the sealant level up to the bottom of the fill hole. Do not overfill
your tank.
3. If the tank is empty, allow 30 minutes for the moistener brush and wick to get completely saturated.
Installing the ink cartridge
1. Tap the Settings (gear) icon in the global toolbar.
2. Scroll down and tap Mail Printer Maintenance or Envelope Printer Maintenance.
3. Tap Install Ink.
4. Lift the cover. The ink cartridge moves to the front position.
5. Remove the ink cartridge, as shown on the label next to the cartridge holder.
6. Insert the new ink cartridge and close the cover. The cartridge repositions itself and the Mail
Printer Maintenance screen re-displays.
7. Perform a print test to ensure you get a good test print pattern.
Pitney Bowes
Operator Guide
August 2019
Quick start guide
35