10 • Maintenance
Filling the Moistener
Refer to the following procedure to refill the moistener.
1. Check the moist en er tank to see how much sealing so lu tion is
left.
2. Add enough E-Z Seal
of the fill hole. We rec om mend E-Z Seal be cause it helps keep
your moist en er clean and im proves seal ing ef fi cien cy. See Chap-
ter 12, Supplies and Options for part numbers to order this item.
3. If the tank was emp ty, al low 30 min utes for the moist en er
brush and wick to get com plete ly wet.
IMPORTANT: Do not overfi ll the moistener tank.
10-4
Fill Here
Check Level Here
to bring the sealant level up to the bottom
®
SV62667 Rev. A