Setting The Timeouts; Setting The Normal Preset Timer; Setting Sleep Mode Activation Time - Pitney Bowes dm475m series Operator's Manual

6 • System Options

Setting the Timeouts

You set the amount of time your system can remain inactive before
reverting to the normal preset values and before reverting to Sleep
Mode. Also, on the DM400M/DM475M only, you can set the Wait for
Envelope Time.

Setting the Normal Preset Timer

The normal preset is a set of values (postage, Graphic Ad, account
and so on) that your machine display automatically returns to after a
set period of time. You can set the amount of time the display takes
before it reverts to the normal preset.
1. Press Options.
2. Select "Setup".
3. Select "Time and Timeouts".
4. Select "Normal Preset Timeout"
5. Key in the amount of minutes (from 1-240) before the system
returns to the normal preset.
6. Select "OK". The display returns to Time and Timeouts menu.
7. Press Home to return to the home screen.

Setting Sleep Mode Activation Time

You can set the amount of time the machine waits until entering
"sleep mode". When the machine is in sleep mode, the display
is blank and you can't process mail. You awaken the machine by
pressing any button on the control panel.
1. Press Options.
2. Select "Setup".
3. Select "Time and Timeouts".
4. Select "Sleep Mode Timeout"
5. Key in the amount of minutes (from 1-240) before the system
goes into sleep mode.
6. Select "OK". The display returns to Time and Timeouts menu.
7. Press Home to return to the home screen.
SDC2036A 6-5