Pitney Bowes DM200ITM User Manual

DM200i™, DM300i™, DM400i™, DM300L™, DM400L™ Mailing Machines
Get new postage rates today,
automatically switch on May 11!
Your meter will continue to use current rates until May 11, 2009. The new rates you download today
will automatically activate on May 11.
Prepare to get new rates
1
As you normally would for a postage refill,
•
Connect your meter to an analog phone line.
Connect to Pitney Bowes
2
From the Ready screen,
•
Press the Options key.
•
Select Setup Menu.
•
Select Updates and Add-Ons.
•
Select IntelliLink - Get Update.
(A series of communications messages will appear on the screen.)
Get new rates
3
When the screen displays "Update Available",
•
Press the Yes key.
(A series of communications messages will appear on the screen. This will take about 3 minutes.)
If you are prompted to update your presets, it is suggested that you DO NOT update your presets
4
at this time. Instead, after your rate update is complete, use our
for setting up presets on the reverse side.
CONGRATULATIONS!
5
You will know the rates have successfully
downloaded when your system returns to
the Ready screen.
New rates will take effect on May 11.
Continue on reverse side.
NEW & IMPROVED
New rate shown below will
appear on May 11, 2009
0 lb 1.0 oz
$0.44
May 11.2009
Class: 1stReg Letter
Ready to Print
Ready screen when Control Center
is connected to Mailing
Machine Base
RCG8XX
method
$0.00
May 11.2009
Class: XXXX
OR
Printing Not Available
Ready screen when Control Center
is not connected to Mailing
Machine Base