Clearing The Transaction Log - Pitney Bowes dm475m series Operator's Manual

12 • Inview/ Budget Manager Accounting

Clearing the Transaction Log

When the transaction log reaches full capacity, you can clear out the
log to allow the inclusion of new transactions.
Follow the steps below to clear the transaction log:
1. Press Options.
2. Select "Accounts".
3. If the supervisor password is enabled, you will be prompted to enter
it and select "OK" to continue.
4. Page Down and Select "Transactions Options".
5. Select "Clear Transaction Log". The Clear Transaction Log
screen appears.
6. If you want to print a report select "Yes". If you do not want to
print a report select "No". The Continue to Clear Log screen
appears.
7. Select "Yes" to clear the log. The system returns to the
Transaction Options screen.
8. Press Home to return to the Home Screen.
NOTE: The transaction log can only be cleared after an upload to
the data centre has been completed.
12-34 SDC2036A