Connecting To The Data Centre; Check For Updates - Pitney Bowes dm475m series Operator's Manual

Connecting to the Data Centre

You can modify the connection settings on your machine. The Data
Centre menu choices are:
•

Check for Updates

• Network Settings
• Distributor Settings

Check for Updates

Use this feature to connect to the Data Centre for software
downloads, new updates, etc. See also Chapter 5, Adding Postage/
Connecting to Data Centre for more information on this feature.
1. Press Options.
2. Press Page Down twice.
3. Select "Data Centre Options".
4. Select "Check for Updates". The system automatically connects
to the centre.
NOTE: Make sure the machine is connected to a LAN or via
PCMC.
5. After connection is made, if a software, postal update or
download is available, a message displays to inform you.
A. If a download is not mandatory, you will be prompted with
either "Download Now" or "Skip, Return Home". Select your
preference.
B. If a download is mandatory, on "Download Now" displays.
Select this to restart the system.
6. After the download has completed, a message stating so
displays.
7. If you need to reboot the system, the prompt "Restart Now"
displays If no rebooting is necessary select "Return Home" to
return to the home screen.
SDC2036A
CAUTION: Changing these settings can affect the
ability of your machine to contact the Data Centre.
A member of your network support may need to
change these settings.
6 • System Options
6-11