Table of Contents
Advertisement
Front View (with Front Bezel Removed)
Refer to Chapter 8 for more information on the LEDs indications.
1
6
1
CD-RW/DVD-ROM drive
The CD-RW/DVD-ROM drive reads data from the inserted CD/DVD-ROM.
1-1: Access LED (lights orange during the access)
1-2: CD/DVD tray eject button
1-3: Emergency hole
2
5-inch device bay
Install a 5-inch device into this slot.
3
Monitor connector (only for maintenance use)
Do not connect any display unit. This connector is exclusively used for maintenance.
4
DUMP switch
Press this switch to collect a memory dump if the memory dump feature is enabled on the
operating system (see Chapter 8).
5
Front USB1 (top) / Front USB2 (middle) / Front USB3 (bottom) connectors
Connect a device supporting the USB 2.0 (Hi-speed) interface.
6
Front fan box
7
2.5-inch device bay
Install a 2.5-inch hard disk drive. The last digit represents the slot number.
8
DISK Access LED
9
DISK Error LED
1-1 1-2 1-3
2
7-0 7-1 7-2 7-3 7-4 7-5 7-6 7-7
3
4
5
2-5
8
9
6
Advertisement
Table of Contents
