Front View With Front Bezel Removed - NEC EXPRESS5800/120Re-2 Service Manual

Front View with Front Bezel Removed

Figure 2-36 shows the location of the front panel system features visible with
the front bezel removed.
B C D E
A
A Captive thumb screws (2). The screws secure the server to the rack.
B Handles (2)
C Hard disk bay (ID 0)
D Hard disk bay (ID 1)
E Hard disk bay (ID 2)
F DISK lamp (green/amber) Each hard disk blinks green during disk activity. The lamp turns
amber when the hard disk fails. The lamp flashes switching back and forth between green
and amber during build processing (in a disk array configuration only.)
G Hard disk bay (ID 3)
H Hard disk bay (ID 4)
I Hard disk bay (ID 5)
J Flex bay. A hard disk or CD-ROM, floppy disk drive combination can be mounted in this
bay. A CD-ROM, floppy disk drive combination is mounted in the standard configuration. If
a hard disk drive is mounted, SCSI ID8 is assigned to the bay.
K CD-ROM drive disk access lamp
L CD-ROM drive tray eject button
M CD-ROM drive emergency CD eject hole
N Floppy disk eject button
O Backup device bay. Mount an optional DAT or AIT drive in this bay.
P Floppy disk diskette slot
2-32 Setting Up the System
F G H I J
Q
R S
K L M
P O N
T U V W
BB AA
B
A
X
Y
Z