Connecting To Lines To Be Measured - Hioki 3169-20 Instruction Manual

Connecting to Lines to be
Measured
Please read the Usage Notes (page 7) before making
connections.
4.1 Connection Procedure
❖3.3 Connecting the Voltage
Cords (page 27)
❖3.4 Using a Clamp-On Sen-
sor (Option) (page 29)
❖3.5 Turning the Power On/Off
(page 33)
SCREEN
WIRING
DIAGRAM
WIRING
CIRCUIT
select
SCREEN
WIRING
CHECK
Verify that the voltage cord or clamp-on
1
sensor is properly connected to the
input terminals.
Turn on ( | ) the 3169-20/21.
2
Select the wiring diagram screen on the
3
measurement screen to view the wiring
select
diagram.
Set the wiring method and number of
4
circuits by using the
F3
Connect the voltage cords and clamp-on
5
sensor to the lines to be measured in accor-
dance with the displayed wiring diagram.
Select the wiring check screen to check
6
the current connection.
Set the parameters on the setting screen.
7
Measurement
4.1 Connection Procedure
F2
(CIRCUIT) keys.
OK
7
To
❖5 Setting Procedure (page 55)
❖6 Measurement Method (page 95)
35
4
❖(page 36)
(WIRING) and
❖(page 36)
❖(page 48)
❖(page 49)
NG
5
To
1
2
3
4
5
6
7
8
9
10
11