Connecting The External Input/Output Terminal - Hioki 3169-20 Instruction Manual

Using the External Input/Output
Terminal
The external input/output terminal uses 0/5-V logic signals or short/
open contact signals to control the 3169-20/21. For connection, the
optional 9440 cable is required.
10.1 Connecting the External Input/Output
Terminal

Connecting the External Input/Output Terminal

9440 CONNECTION CABLE
External input/output
connector (EXT I/O)
A plastic connector is used for the connection cable. Do not
insert it into the terminal without aligning the guide grooves or
pull it without releasing the lock, to prevent damage to the con-
nector.
10.1 Connecting the External Input/Output Terminal
Insert the 9440 connection cable into the
external input/output terminal (EXIT I/O),
aligning the connector guide grooves (the
connector is equipped with a lock). When
removing the connection cable, hold it by
the plastic part.
Pin No. Signal Name
1 Start/stop (input)
2
3 Status (output)
4 Data storage (input)
5 Ground (common)
9440 Cable Color
--
151
10
1
2
3
4
5
6
7
Red
8
White
Black
Yellow
9
Blue
10
11