Hioki 3169-20 Instruction Manual page 185

Other
Effect of conducted
radio-frequency
electromagnetic field
Conditions of Guaranteed Accuracy
Conditions of
Guaranteed Accuracy
Temperature and
humidity for
guaranteed accuracy
Fundamental
waveform range for
guaranteed accuracy
Display area for
guaranteed accuracy
Period of guaranteed
accuracy
External Interface Specifications
PC card interface
Slot
Card
Storage capacity
Data format
Stored data
RS-232C interface
Method
Connector
Transfer method
Baud rate
Data length
Parity check
Stop bit
Flow control
Delimiter
Influence of a conductive radio-frequency electromagnetic field
±
With a current of 3% f.s. at 3 V (when the 9667 is used; f.s. is the
rated primary current of the 9667)
Warmup time of more than 30 minutes, input of a sine wave, power
factor = 1, and PLL synchronization
23°C ± 5°C(73°F± 9°F), 80% RH or less
45 to 66 Hz
Effective measurement area
1 year
PC Card Standard Type II slot x 1
Flash ATA card
Up to 528 MB
MS-DOS format
Setting, measurement, and screen data
EIA RS-232C
Mini DIN 9-pin connector x 1
Asynchronous communication method, full duplex
2400/ 9600/ 19200/ 38400 bps
8 bits
None
1
None, XON/XOFF, RTS/CTS
CR+LF/ CR
177
13
2
3
4
5
6
7
8
9
10
11